HAVN BF 360 Flow Mid Tower Tempered Glass ATX Case - Black | HVN-CA-BF360-04

HAVN BF 360 Flow Mid Tower Tempered Glass ATX Case - Black | HVN-CA-BF360-04

The HAVN BF 360 Flow takes the BF 360 chassis and adds out-of-the-box cooling - two 180mm HAVN H18 front fans and a 140mm H14 exhaust come pre-installed. Combined with the semi-open frame and aerodynamic 135 degree ramp, it delivers strong airflow from the first boot with nothing left to buy.

Three HAVN Fans Pre-Installed

Two 40mm-thick HAVN H18 180mm fans sit up front delivering 164.63 CFM of intake each, with a HAVN H14 140mm fan at the rear for exhaust. The result is high airflow and low noise without adding a single fan to your shopping list.

Full Coverage Airflow

The front, top and rear panels use a rib-pattern vent that maximises airflow at 315.1 CFM with minimal interference. Air is drawn in through the front and directed up a 135 degree ramp to cool the GPU and CPU directly, while waste heat exhausts through the top and rear.

Minimalist SGCC Steel Build

Manufactured from premium SGCC steel and reinforced in the high-stress areas, the BF 360 Flow uses a rigid U-shaped structure that stays solid while making assembly smoother. The front panel carries a five-layer stacked slate texture for a quietly premium finish.

Water Cooling Ready

The top panel accepts radiators up to 360mm, making the Flow an ideal base for a large AIO, with 195mm of clearance for CPU cooler towers.

Modern Hardware Support

The motherboard tray supports E-ATX up to 277mm wide, ATX, Micro-ATX and Mini-ITX, with an ATX power supply up to 200mm and up to 410mm of GPU clearance backed by an adjustable support bracket.

Easy Build, Easy Maintenance

Magnetic front and top panels, a pull loop, rubberised edge grooves and the SimpliCable routing system all make assembly and maintenance straightforward. Vibration-damped fan brackets and drive trays keep noise in check, and the front I/O adds USB-C 3.2 Gen 2 plus two USB-A 3.2 Gen 1 ports.