×

:

Not a valid Time
This is a required field.

Lian Li UNI Reverse Blades TL LCD 120mm Fan - White | 12RTLLCD1W

AED 180.00
In stock
SKU
12RTLLCD1W
  • 1.6" 400 x 400 Customizable IPS Display
  • Dual Zone Lighting Effects with 26 LEDs
  • Fluid Dynamic Bearing Technology
  • Fan Speed: 350 to 1900 rpm
  • Nine Reverse Fan Blades
  • Enlarged Infinity Mirror
  • Pulse-Width Modulation
  • Maximum Noise: 31 dBA

Lian Li UNI Reverse Blades TL LCD 120mm Fan - White | 12RTLLCD1W

-

Performance Detail at a Glance
Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen.

Note: The more sensors used, the higher the CPU load will be. It is recommended to keep sensor display at a maximum of 3.

Unique Style

Elevate your system's style by uploading your own personalized MP4 / GIF / JPG / PNG.

Next Generation of UNI FAN

Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
A single cable is all you need to connect a group of up to 3 TL LCD fans to the controller, which supports a maximum of 7 TL LCD fans per controller, with a group of 3 on each port (up to 16 TL+TL LCD fans in total). To operate 8 to 12 TL LCD fans, please use 2 controllers simultaneously. Note that L-Connect 3 doesn't support more than 13 TL LCD fans.

Note: The controller cable is only applicable on the pin side of the fan. Do not install it the other way.

Well Adapted for Most Configurations
The interlocking key at the end of TL LCD fans is removable for enhanced compatibility and less interference with other components.

Stable Operation

The UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Rubber Ring
To provide extra support for fan operation.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Shaft and Copper Base
To ensure fan blade stability during operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

Breeze Your System
This fan provides an improved cooling experience with a fan that doesn't compromise on thermal control, all while offering a personalized screen for a touch of individuality. It features an airflow of 54.3 CFM, a static pressure of 2.83mm H2O, and noise levels of 31 dBA.

Customizable Fan Speed
You're able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3. This fan has a speed of 350 to 1900 rpm.

Continuous RGB Lighting
Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Infinity Mirror
Illuminate your setup with the UNI FAN TL's enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Individual Lighting Effects
Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Smooth Appearance
Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

Software
L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

Two Fans, One Controller
UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 7 TL LCD fans.

Fan Group Signal
Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn't support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard's 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.