Cooler Master MWE 650 Bronze V2 80 Plus Bronze Certified Power Supply | MPE-6501-ACAAB-UK

AED273.00
Out of stock
SKU
MPE-6501-ACAAB-UK
  • DC-to-DC Technology
  • 120mm HDB Fan
  • Silent Mode
  • 80 PLUS Bronze Efficiency
  • Flat, Black Cables

80 PLUS BRONZE EFFICIENCY

The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%.

Cooler Master now reports Cybenetics noise and efficiency ratings for current power supply units where applicable. For more information about the Cybenetics rating system and their work with Cooler Master

DC-TO-DC CIRCUIT DESIGN

Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly. The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware.

ACTIVE POWER FACTOR CORRECTION

The many processes required by a power supply unit in order to take power directly from the wall or other fixed power source, convert it to the correct output required by the connected components, and then distribute that power to said components safely can be full of risks. This is why it’s important for a PSU to have the right protections and regulations to ensure this process runs correctly.

The MWE Bronze’s Active Power Factor Correction uses a specialized circuit to correct power factor, leading to reduced total harmonics, corrected AC input voltage, and increased overall efficiency output.

More Information
SKU MPE-6501-ACAAB-UK
Specifications
Model
MPE-6501-ACAAB
ATX Version
ATX 12V V2.52
PFC
Active PFC
Input Voltage
100-240V
Input Current
10-5A
Input Frequency
50-60Hz
Dimensions (L x W x H)
140 x 150 x 86 mm
Fan Size
120mm
Fan Bearing
HDB
Fan Speed
2400 RPM
Noise Level @ 20%
11.06 dBA
Noise Level @ 50%
22.3 dBA
Noise Level @ 100%
41.3 dBA
Efficiency
85% Typically
80 PLUS Rating
80 PLUS Bronze
ErP 2014 Lot 3
Yes
Operating Temperature
40°C
Power Good Signal
100-500ms
Hold Up Time
>18ms at 100% Full Load@230Vac
MTBF
>100,000 Hours
Protections
OVP, OPP, SCP, UVP, OTP
Regulatory
CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB
ATX 24-Pin Connectors
1
EPS 4+4 Pin Connectors
1
EPS 8 Pin Connector
1
SATA Connectors
8
Peripheral 4-Pin Connectors
4
PCI-e 6+2 Pin Connectors
4
80 Plus
Bronze
Modular
Non Modular
Wattage
500 to 750W
Serie
MWE Bronze Series
Brand COOLER MASTER
Weight 1.000000
Write Your Own Review
You're reviewing:Cooler Master MWE 650 Bronze V2 80 Plus Bronze Certified Power Supply | MPE-6501-ACAAB-UK
Your Rating

The team typically replies in a few minutes.

Chat with us on WhatsApp